|
|
|
|
|
|
|
|
|
|
|
|
|
|
Poison Spyder Bombshell Diff Covers are designed to protect your gears, lockers and diff cover bolts from the most punishing rocks and trail hazards.
|
ARB Competition Differential Cover DANA 44 JK FRONT and REAR - Fabricated from high tensile solid nodular iron that is tougher and harder than solid carbon steel, the new ARB differential cover is the ideal piece of equipment to protect your air locker and ring and pinion set up from the obstacle impacts of competition rock crawling and challenging off-road trails.
|
ARB Competition Differential Cover DANA 30 Front (Non Rubicon) - Fabricated from high tensile solid nodular iron that is tougher and harder than solid carbon steel, the new ARB differential cover is the ideal piece of equipment to protect your air locker and ring and pinion set up from the obstacle impacts of competition rock crawling and challenging off-road trails.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Special Edition of the beefiest differential armor out there!
This 65-45-12 ductile iron covers are a clean, trim shape that provies ample clearance for front or rear applications where steering or gas tank clearnace is a concern due to it’s slim 3 9/16" height.
Rebel Off Road badge is laser cust stainless steel. Gasketed fill plug with dipstick, socket head allen hardware and cover gasket included.
Fits RockJock 60 & 70, all high or low pinion 60’s and low pinion Dana 70’s. Cover ships raw.
|
The differential protectors bolt onto the original holes in the vehicle.
|
The differential protectors bolt onto the original holes in the vehicle.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The differential protectors bolt onto the original holes in the vehicle.
|
The differential protectors bolt onto the original holes in the vehicle.
|
Protect your critical driveline components with a high grade ductile iron Riddler Diff cover. The cover is CNC machined with a lip free transition design so that you don’t get hung up and includes stainless fasteners, permatex sealant and a lifetime guarantee.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Poison Spyder Bombshell Diff Covers are designed to protect your gears, lockers and diff cover bolts from the most punishing rocks and trail hazards. The stock covers your Jeep came with are weak, stamped sheetmetal. Even a moderate tap with a rock can cave it in against your ring gear, causing potential damage to the gears, locker and carrier bearings, not to mention a difficult, messy trail fix. Even more common, though less catastrophic, is "peel back" that can occur when sliding over a rock causes the lip of the cover to peel up, allowing your gear oil to drain causing a hazard for both your Jeep and the environment. The Bombshell Diff Cover is your best insurance against each of these hazards.
|
Poison Spyder's Bombshell diff cover is designed to protect your gears, lockers and diff cover bolts from the most punishing rocks and trail hazards.
|
Protect your critical driveline components with a high grade ductile iron Riddler Diff cover. The cover is CNC machined with a lip free transition design so that you don’t get hung up and includes stainless fasteners, permatex sealant and a lifetime guarantee.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Protect your critical driveline components with a high grade ductile iron Riddler Diff cover. The cover is CNC machined with a lip free transition design so that you don’t get hung up and includes stainless fasteners, permatex sealant and a lifetime guarantee.
|
The TeraFlex HD44/CRD50 differential covers are designed to offer extreme protection from rocks, obstacles and other debris on the trail. The cover is cast from the same high-strength ductile-iron as our HD axle housings. The cover is over 3/8” thick to ensure protection. It also offers two fill plugs for use in standard or high pinion D44 housings, or when the pinion must be rotated in extreme applications.
Includes new mounting hardware.
|
The TeraFlex HD30 differential covers are designed to offer extreme protection from rocks, obstacles and other debris on the trail. They are more than 3/8" thick.
Includes new mounting hardware.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tired of scraping the mess silicone sealant leaves behind on the differential cover? All vehicles deserve clean, grit free differentials with no oil seepage.
|
Tired of scraping the mess silicone sealant leaves behind on the differential cover? All vehicles deserve clean, grit free differentials with no oil seepage.
|
Tired of scraping the mess silicone sealant leaves behind on the differential cover? All vehicles deserve clean, grit free differentials with no oil seepage.
|
|
|
|
|
|
|
|
|
|
|
|
|
Tired of scraping the mess silicone sealant leaves behind on the differential cover? All vehicles deserve clean, grit free differentials with no oil seepage.
|
|
|
