The Solo S1100 in the Solstice Series of LED off road lamps. Equipped with Vision’s brand new 10 watt LED technology, with each 10 watt Solo producing 800 lumens making them the brightest LED off road lamp on the market in only a 2" x 2" square housing. Not only are they the brightest, they are the most efficient with the s1100 drawing only 0.75 amps due to their advanced electronic drivers which are also responsible for their 50,000 hour life span and variable 9 - 50 Volt DC input. The Solstice Solo’s main feature is the 4 sided channel design that allows you to interlink it on all four sides with another Solstice Solo pod or other various available mounting hardware for flat, tube or even helmet mount making it the only modular light with the ability to make any shape or length with the available spot, euro and flood beam patterns mixed throughout your custom configuration. No power on your ride, no worries; Vision X will also be releasing a line of rechargeable battery packs for any configuration of your Solstice Solo light pods.
Key Features: rugged die-cast aluminum housing provides optimum durability and heat dissipation. The Solstice Solo series features an IP68 ingress protection rated housing making them impenetrable to dust and submersible under water up to 3 meters. The unbreakable polycarbonate lenses are housed by a 6061 aluminum face plate which doubles as a radiant heat sink to melt away snow and ice in frigid conditions. The Solstice Solo series has been subjected to a 14Grms vibration test to ensure their performance in high impact conditions.
Built to last, this Vision X series features a lifetime warranty.
FAQ:
1. Will these be a plug-n-play for those of us with factory fogs? In other words, will it have the factory connector or do we cut and splice to the existing wiring to maintain the factory on/off switch?
These do have the factory plugs for up to ’09 JK, and what’s called a T-tap for ’10 and up. T-taps just “crimp on” around factory wiring. Both will be sent with your order.
2. Do these require a relay? Or can we just connect to the factory wiring?
When pulling power from factory wiring, nothing else is needed.
3. Will these lights be adversely affected by the canbus system? Do we need to add capacitors, diodes, etc. to mitigate the canbus system?
Does not affect the Canbus system, works fine.
